Yamaha NIKEN
The Yamaha NIKEN was first unveiled at the 2017 Tokyo Motor Show, and official sales began in September 2018 (model year 2019).
The model is distinguished by a unique concept, which is based on the use of two front wheels and the proprietary LMW (Leaning Multi Wheel) system, which allows a three-wheeled motorcycle to get the control of a two-wheeled one. Prior to the NIKEN model, similar technologies were used in the Yamaha Tricity scooter.
The Yamaha NIKEN was based on the engine from the MT-09 series - an in-line 3-cylinder liquid-cooled block with a volume of 847 cm³, producing 115 hp. power and almost 88 Nm of torque.
The frame of the motorcycle is a steel tube structure with aluminum elements such as a swingarm. The front suspension is a combination of two inverted telescopic forks per wheel, fully adjustable. The LMW system achieves the effect of fully independent suspension at the front, ensuring optimal traction in virtually all conditions and in all weather conditions.
In parallel with the regular version of NIKEN, the NIKEN GT is offered on the market. This modification features a high touring glass, a more comfortable seat, heated arms, side trunks, a trunk, two 12V sockets and a central stand.
NIKEN series models also feature all of Yamaha's latest electronic technologies:
- Electronic Throttle (YCC-T - Yamaha Chip Controlled Throttle)
- ABS
- Cruise control
- Traction control (TCS - Traction Control System)
- Selectable engine operating mode (Selectable D-Mode)
- Quick Shift (QSS - Quick Shift System)
- Assist and Slipper clutch
Photos
Specifications
Specifications Yamaha NIKEN:
| Model | Yamaha NIKEN |
|---|---|
| Motorcycle type | sports and tourist |
| Release year | 2019+ |
| Frame | Hybrid (steel pipes, aluminum swingarm) |
| Engine type | 3-cylinder, 4-stroke, in-line |
| Working volume | 847 cm³ |
| Bore / stroke | 78.0 x 59.1 mm |
| Compression ratio | 11.5: 1 |
| Cooling | liquid |
| Number of valves per cylinder | DOHC, 4 valves per cylinder |
| Fuel supply system | Injector with YCC-T (Yamaha Chip Controlled Throttle), 3x 41mm |
| Ignition type | TCI |
| Maximum power | 115.0 h.p. (84.6 kW) at 10,000 rpm
D-Mode TCS (Traction Control System) Cruise control system |
| Maximum torque | 87.5 Nm (8.8 kg-m) at 8500 rpm |
| Gearbox | 6-speed
QSS (Quick Shift System) |
| Drive type | chain |
| Front tire size | 2x 120/70-R15 M / C (56V) |
| Rear tire size | 190/55-R17 M / C (75V) |
| Front brakes | 2x 2 discs, 298mm, 4-piston radial calipers (ABS) |
| Rear brakes | 1 disc, 282 mm, 2-piston caliper (ABS) |
| Front suspension | 2x 43 / 41mm Inverted Forks (LMW system - Leaning Multi Wheel) (Fully Adjustable), 110mm Travel |
| Rear suspension | linkage with monoshock (fully adjustable), stroke - 125 mm |
| Motorcycle length | 2150 mm |
| Motorcycle width | 885 mm |
| Motorcycle height | 1250 mm - NIKEN
1425 mm - NIKEN GT |
| Wheelbase | 1510 mm |
| Saddle height | 820 mm - NIKEN
835 mm - NIKEN GT |
| Minimum ground clearance | 150 mm |
| Acceleration to 100 km / h | 4.0 sec |
| Maximum speed | 210 km / h |
| Fuel tank capacity | 18.0 l (including reserve - 4.0 l) |
| Motorcycle weight (curb) | 263.0 kg - NIKEN
267.0 kg - NIKEN GT |
Documentation